9
Rev.1.3
[5]
[TALK] switch
[ON]: Usable classroom audio condition (Microphone is operational.)
[OFF]: Standby condition (Microphone is not operational.)
[6]
[PWR LINK] button (rear)
When pairing this microphone with the receiver, press this button at the same time as the TALK
push button or TALK switch.
[7]
[AUDIO IN] External input terminal (rear)
Transmits the audio from a connected external device to the receiver.
When an external device is connected to this terminal, audio from the [1] microphone opening is
muted.
[8]
DC input terminal (rear)
Used to connect the charger for charging the battery installed in the microphone and to supply
power to the microphone.
[9]
Battery cover(side)
To remove the battery cover, push it down and pull it off.
[10]
LINK switch (inside the battery cover)
Select the Link mode.
[OFF]: Same receiver connection
[ON]: Different receiver connection (Default)
*Note, leave this switch on to reserve it for future application
[11]
Battery slot (inside the battery cover)
Install one lithium-ion rechargeable battery, paying attention to the charging terminal inside the
battery cover.
*Standby state: State power switch is OFF, the radio is still connected. The microphone will
automatically turn off when the TALK switch or TALK push button has not been operated for 30
minutes.
