Audio Excellence Raijuu 1 User Manual Download

Page: 5 / 5

Screen Excellence Ltd. 136 Bentwaters Parks, Rendlesham, Suffolk, IP12 2TW, UK Version 1.0

Connections

Speakon 2 NL2MP signal input.

The signal input can be found at lower right-hand
side.

Input Signal is connected to the driver via a

NL2FX Speakon 2 plug, Same is used to connect
the lead to the amplifier output channel.

This Wiring connections to rear of the NL2FX
signal plug:

1+ Positive (

red

) and 1- Negative (

black

)

Summary of Contents for Raijuu 1

Page 1: ...ubwoofers operating from 20 Hz to 100 Hz They are to be coupled to limited range loudspeakers via an active DSP crossover Please refer to Congard Code for the correct placement of your Raijuu Bass speaker to achieve a realistic sound stage to compliment any film material in your cinema http audioexcellence one congardcode html ...

Page 3: ...etailing the signal binding post pair ready to receive the signal from the amplifier output channel The binding post with the red trace would be the positive connection and black the negative connection Rubber feet are supplied to help isolate the speaker from any hard surfaces when it is located on the floor ...

Page 4: ...igned to provide the maximum impact and SPL for an ultimate playback of the LFE channel It is a vented design 1 Dimensions 650 x 550 x 339 mm 2 Weight 40 kg 3 Connector Speakon 2 4 Drive unit 1 x 18 high power driver 5 Frequency response 20 100 Hz 6 Impedance 8 Ω 7 Power handling 1400 W 8 Max SPL 1m 40Hz 120dB 9 Max SPL 1m 20Hz 110dB ...

Page 5: ...kon 2 NL2MP signal input The signal input can be found at lower right hand side Input Signal is connected to the driver via a NL2FX Speakon 2 plug Same is used to connect the lead to the amplifier output channel This Wiring connections to rear of the NL2FX signal plug 1 Positive red and 1 Negative black ...