VCP-010-06(-07)-x Installation & Operation Manual
Document # 540236, Rev IR, 11/2002
Page 6 of 21
6.1.3 The video output connector (BNC1) allows for connection of the
VCP to the video source selector. Since the video source does not
have audio switching, it will provide video output only. Separate
audio outputs are provided.
6.1.4 If power is interrupted (>250 msec) while a cassette is in the video
player, the player will shut down and the cassette must be ejected
and reinserted into the VCP to restart playback.
6.1.5 The VCP powers up to an output of NTSC. Press the FORMAT
button on the front of the player to change the output standard
between NTSC and PAL.
6.2 Typical
Application
6.2.1 This system is fully compatible with Audio International’s proprietary
RS-485 digital data bus system. It can be configured for IR remote
control utilizing AI’s remote control unit AI-RCx-17xxxx and
IFR-485.
