VCP-010-06(-07)-x Installation & Operation Manual
Document # 540236, Rev IR, 11/2002
Page 20 of 21
ILLUSTRATION OF FRONT PANEL BUTTONS
(Note that the VCP-010-07-x cover bezel is used for reference only; the button
configuration is the same on all VCP-010-06(-07)-x models)
2.0
To Load a Videocassette Tape into the Tape Slot
2.1
Gently insert a videocassette tape into the cassette tape slot. Apply
slight
forward pressure to the side edge of the tape. The VCP-010-06(-07)-x will
gently ‘pull’ the tape into the player. Playback begins playing
automatically when the videocassette is inserted into the slot.
2.2 If the videocassette is inserted incorrectly, the loading system will not
function. Do not force the tape into the unit. See section 8.2,
Troubleshooting, if difficulties arise in getting the VCP to accept a
videocassette.