Please take care when unpacking your
IO Limited. Choose a clean, clear location to
unpack your cartridge. We recommend that you retain and carefully store all of the
original packing materials, in case transportation / shipping is required at a later date.
Open the wooden transit box. You will see that the cartridge is mounted on a wooden
insert for protection during shipping. The cartridge is supplied with the removable
stylus guard installed, and we recommend leaving it in place during the initial
installation procedure.
Carefully remove the wooden insert. Underneath, you should find an appropriately
sized hex head wrench. Gently hold the cartridge by its side cheeks, and identify the
two mounting bolts that secure it to the wooden insert. Carefully remove the two
mounting bolts, and once removed, retain these as they can be used to attach the IO
Limited to your tonearm heashell.
Once the cartridge, mounting bolts and wrench have been removed, place the transit
box and insert to one side. Once installation has been completed, return the wrench
to the box and store safely for later use.
You are now ready to mount your IO Limited in your tonearm
ʼ
s head-shell.
UNPACKING AND INSTALLATION
