20
ATW-T3201/ATW-T3202 settings
Setting the transmission frequency
1. From the main menu, press the UP/DOWN button to select
[FREQUENCY] and then press the SET button.
2. Select [MANUAL] and press the SET button.
3. Press the UP/DOWN button and set the first 3 digits. After
completing the setting, press the SET button.
4. Press the UP/DOWN button and set the last 3 digits. After
completing the setting, press the SET button.
• The setting is complete.
Setting group/channel
1. From the main menu, press the UP/DOWN button to select
[FREQUENCY] and then press the SET button.
2. Select [Gr/Ch] and press the SET button.
3. Press the UP/DOWN button and set the group. After completing
the setting, press the SET button.
4. Press the UP/DOWN button and set the channel. After
completing the setting, press the SET button.
• The setting is complete.
Setting NAME
The following characters can be entered:
• The maximum number of characters that can be entered is 8.
• The following characters can be entered:
Alphabetical characters
(upper case)
Numbers
Symbols (+, -, #, &, period)
Space
1. From the main menu, press the UP/DOWN button to select
[NAME] and then press the SET button.
2. Press the UP/DOWN button to select the character you want to
set and then press the SET button.
• The character is input and the cursor moves to the right.
3. Enter all the desired characters in the same way as in step (2).
• If you do not enter 8 characters, press the UP / DOWN button, select
[End], and press the SET button
4. At the 8th character, press the SET button.
• [End] is displayed.
5. Press the SET button.
• The setting is complete.
Setting gain
1. From the main menu, press the UP/DOWN button to select
[GAIN] and then press the SET button.
2. Press the UP/DOWN button and set the gain.
• The level changes 2 dB +/- each time you press the UP/DOWN button.
3. Press the SET button.
• The setting is complete.