21
Setting RF output
1. From the main menu, press the UP/DOWN button to select [RF
POWER] and then press the SET button.
2. Press the UP/DOWN button and select RF output as [Low: 10
mW]/[High: 30 mW]/[OFF].
3. Press the SET button.
• The setting is complete.
Setting HPF (High Pass Filter)
1. From the main menu, press the UP/DOWN button to select [HPF]
and then press the SET button.
2. Press the UP/DOWN button to select [ON]/[OFF].
3. Press the SET button.
• The setting is complete.
Setting key lock
1. From the main menu, press the UP/DOWN button to select
[LOCK] and then press the SET button.
2. Press the UP/DOWN button to select [Lock]/[Unlock].
Lock
Keys locked
Unlock
Keys unlocked
3. Press the SET button.
• The setting is complete.
Setting button mode
The function is assigned when RECALL/Multi function button is pressed
and hold.
1. From the main menu, press the UP/DOWN button to select
[BUTTON MODE] and then press the SET button.
2. Press the UP/DOWN button to select the item you wish to set.
Disable
No function
Normal Mute
(only for ATW-T3202)
Muted
Forced Mute
(only for ATW-T3202)
Mute in on when key is locked.
BKUP CH
Frequency backup mode (When selected,
frequency, group, and channel are set.)
RF Off
RF output is OFF.
3. Press the SET button.
• The setting is complete.
Setting mute mode (only for ATW-T3201)
Set the MUTE switch function.
1. From the main menu, press the UP/DOWN button to select
[MUTE MODE] and then press the SET button.
2. Press the UP/DOWN button to select the item you wish to set.
Normal Mute
Muted
Forced Mute
Mute in on when key is locked.
Disable
No function
3. Press the SET button.
• The setting is complete.