background image

2

Safety instructions 

1.  Read these instructions.
2.  Keep these instructions.
3.  Heed all warnings.
4.  Follow all instructions.
5.  Do not use the apparatus near water.
6.  Clean only with dry cloth.
7.  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8.  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli-

fiers) that produce heat.

9.  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with 

one wider than the other. A grounding- type plug has two blades and a third grounding prong. The wide blade or 

the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician 

for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the 

point where they exit from the apparatus.

11. Only use attachments/ accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket or table specified by the manufacturer, or sold with 

the apparatus. When a cart is used, use caution when moving the cart/apparatus combination 

to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time. 
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged 

in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into 

the  apparatus,  the  apparatus  has  been  exposed  to  rain  or  moisture,  does  not  operate  normally,  or  has  been 

dropped.  

15. When the mains plug or appliance coupler is used as the disconnect device, it shall remain readily operable. 

16. Please keep the unit in a good ventilation environment.

Professional DJ Direct-Drive Turntable 

Introduction 

Thank you for purchasing the AT-LP1240-USB Professional DJ Direct-Drive Turntable 

(USB & Analog). This professional quality DJ turntable is designed primarily for DJ 

use in nightclubs, touring and mobile applications. It can also be used by music 

lovers to play their record collections at home. As an added benefit, the turntable 

offers a USB output that allows direct connection to a computer for easy LP-to-

digital conversion. The turntable also features a built-in switchable phono/line 

pre-amp that allows connection to a stereo system equipped with either a phono 

or line-level input. Additional professional features for DJs include a sliding pitch 

control, anti-skate control, start and brake control adjustments, reverse, and dual 

start/stop controls.

Includes: 
Removable dust cover, Audacity recording software, USB cable & adapter cables

The AT-LP1240-USB Professional DJ Direct-Drive Turntable System features  

the following:
•  Direct drive high-torque multi-pole motor for demanding DJ use
•  USB output – no special drivers required for direct connection to your computer
•  Selectable 33/45/78 RPM speeds
•  Selectable internal stereo phono pre-amplifier
•  Dual start/stop controls
•  Start and brake control adjustments
•  Sliding pitch control with quartz speed lock
•  Reverse operation
•  S-shaped tone arm assembly with:
  ·  Adjustable counterweight
  ·  Anti-skate adjustment
  ·  Tone arm height adjustment and lock
  ·  Tone arm lift with hydraulic action and lift lever
  ·  Tone arm rest with locking mechanism
•  Dedicated ground lug for tone arm grounding
•  Stroboscopic platter and speed accuracy indicator
•  Damped cast aluminum record platter with low-resistance DJ-style slip mat
•  Removable stylus target light
•  45-RPM adapter
•  Adjustable feet for leveling
•  Removable dust cover

To assure maximum satisfaction from this product, please read the information 

and follow the instructions presented in this manual. Please keep the manual in an 

accessible location for future reference. 

Unpacking

Carefully unpack the turntable and verify that the following parts are included and 

intact:
•  Slip mat (above the dust cover)
•  Dust cover (above the turntable)
•  Platter (under the turntable)
•  45 RPM adapter (accessory section)
•  Counterweight (accessory section)
•  Headshell (accessory section)
•  Power cord (accessory section)
•  USB cable
•  Dual RCA (female) to 

1

/

8

" (3.5 mm) mini-plug (male) stereo 

  adapter cable 
•  Dual RCA (female) to 

1

/

8

" (3.5 mm) mini-plug (female) stereo 

  adapter cable
•  Dual RCA (male) cable with integrated ground wire
•  Stylus target light (accessory section)
•  Audacity software (CD)
IT IS RECOMMENDED THAT ALL PACKAGING MATERIALS BE SAVED FOR 

POSSIBLE FUTURE STORAGE, MOVING OR SHIPPING.

Caution: 

To reduce the risk of electric shock, do not remove 

any cover. No user-serviceable parts inside. Refer servicing 

to qualified service personnel only.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The  lightning  flash  with  arrowhead  symbol  within  the  equilateral  triangle  is 

intended to alert the use to the presence of un-insulated “dangerous voltage” 

within the product’s enclosure that may be of sufficient magnitude to constitute 

a risk of electric shock.

The exclamation point within the equilateral triangle is intended to alert the user 

to the presence of important operation and maintenance (servicing) instructions 

in the literature accompanying this appliance.

To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or 

other outlet unless the blades can be fully inserted to prevent blade exposure.

CAUTION

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 

The apparatus shall not be exposed to dripping or splashing and that no objects filled with 

liquids, such as vases, shall be placed on the apparatus.

WARNING 

Summary of Contents for AT-LP1240-USB









Reviews: