Preparation for use
14
Tonearm balance and tracking force
In order for the cartridge to pick up sound correctly from the record’s grooves, the tonearm’s balance and tracking force
must be adjusted to fit the specifications of the cartridge.
If the tonearm’s balance and tracking force are not properly adjusted, the record or the cartridge’s stylus may become
damaged.
Do not drag the cartridge’s stylus across the record or felt mat when adjusting the tonearm’s balance or tracking
force. Doing so may damage the stylus.
Setting tonearm balance
1
Remove the cartridge’s protector.
1
1
Protector
2
Lift the tonearm lift control lever and move the tonearm over the felt mat. Lower the tonearm lift
control lever while holding the headshell.
Be careful not to allow the stylus tip to touch the felt mat.
3
While still lightly holding the headshell, turn the counterweight to adjust the tonearm’s balance.
Adjust the balance so that the tonearm is level when you release the headshell.