6
System Operation
(continued)
Handheld Microphone/Body-Pack Transmitter Setup
Open the battery cover and insert AA batteries into the battery compartment,
making sure the polarity is correct.
Unscrew the bottom of the handheld mic and open the battery cover to insert
AA batteries into the battery compartment, making sure the polarity is correct.
Press and hold the power button on the handheld/body-pack transmitter for
4 seconds to turn on. If the LED remains flashing (either red or green) after 4
seconds, the battery is low on power.
Use a small standard screwdriver or similar object to adjust the frequency of
the transmitter to match the frequency of the receiver. Adjust the transmitters
to the same channel as the receiver. ‘1’ is equal to the first frequency in Group
1. ‘2’ is equal to the first frequency in Group 2.*
Use the 0 dB/-10 dB switch to adjust the audio input level.
*Turn off the transmitter when switching frequency to avoid pops.
0dB -10dB
DE3 Channel & Frequency
(11) 482.625 MHz
(12) 486.825 MHz
(13) 488.225 MHz
(14) 491.550 MHz
(21) 495.775 MHz
(22) 506.300 MHz
(23) 507.700 MHz
(24) 511.375 MHz
HH2 Channel & Frequency
(11) 863.300 MHz
(12) 864.300 MHz
(13) 824.875 MHz
(14) 830.850 MHz
(21) 863.700 MHz
(22) 864.700 MHz
(23) 824.400 MHz
(24) 828.650 MHz
DE3:
482 - 492 MHz,
495 - 512 MHz
HH2:
824 - 831 MHz
863 - 865 MHz
