54
Key functions
2. From “Mode”, select “Gain Share”.
3. Click “Enabled” for each channel that should operate with the
SmartMixer function.
• It turns ON (purple) when clicked.
4. Set “Weight” for each channel, as necessary.
• The gain to be distributed can be adjusted. This can be used also to balance
the background noise for each channel.
5. Assign signals to the output buses.
ON (Blue)
Assigned to an output bus. Audio signals not
processed by SmartMixer are output even when
SmartMixer is turned ON.
ON
(Purple)
Audio signals processed by SmartMixer are output
when SmartMixer is turned ON.
OFF
Not assigned to any output bus.
6. Monitor the gain meter of each channel to confirm that the total gain is
distributed based on the input signals.
