39
Login Password
Set whether or not to require a password for Administrator login.
1. Click the switch to turn on/off the setting.
• The setting is turned ON (blue)/OFF (no color) each time the switch is
clicked.
2. Enter a desired password.
• Create a password using 4 to 8 alphanumeric characters.
3. Click “Apply”.
• The setting is now complete.
Operator Page Permissions
Set whether or not to limit the devices that can be accessed by the
Operator.
1. Click the switch to turn on/off this function.
• The setting is turned ON (blue)/OFF (no color) each time the switch is
clicked.
2. Enter the IP addresses of the devices that can be accessed by
the Operator.
• Up to 5 devices can be registered.
3. Click “Apply”.
• The setting is now complete.
• No other device can be accessed by the Operator.
Setting the system details (Settings & Maintenance)
User Access in System Settings
