background image

About the earpieces

English

12

Remove earpieces from the headphones and clean them with a diluted detergent. After cleaning,

dry before use. 

Remove each old earpiece, and mount the new earpiece over the

stem up to the base of the stem. 

Note: 

Periodically remove and clean the earpieces as they become dirty easily. 

Using with dirty earpieces may cause the headphones to become dirty 

through the earpieces, resulting in deteriorated sound quality.

When reattaching earpieces to the headphones, be sure to check that they are securely attached. Injury or

illness may occur if the earpieces are left inside the ear. 

Sizes and position

Cleaning the earpieces

Replacing the earpieces

Earpieces are consumable parts which degrade through storage and use. lf the fit has become loose or if

the earpieces appear to have degraded, purchase replacements.

It may be difficult to hear the bass sounds if the earpieces do not fit snugly into your ears. These 

headphones come with fine fit earpieces in foursizes (XS, S, M and L) and active fit earpieces in 

three sizes (S, M and L). At the time of purchase, the M size fine fit earpieces are attached to the 

headphones. To enjoy the best sound quality and comfort, you should experiment with the size of 

the earpieces to find the best fit for you. If the headphones are not properly fitted to your ears, 

audio quality may be diminished.

Summary of Contents for ATH-SPORT4


















Reviews: