Audio Technica ATH-SPORT4 Instruction Booklet Download

Page: 14 / 17

Troubleshooting

Other functions

English

Auto Power Off function

The headphones will automatically turn off after 5 minutes if it has not been connected to a device

with the power turned on.

If these headphones stop working or if a malfunction occurs, they can be reset by charging the

batteries.

* Even if the headphones is reset, volume and other functions won't be initialized.

Reset function

Charge the headphones.

Power is not supplied

Unable to pair

Bring the headphones and the

Bluetooth

device closer together – within the range of 1 meter.

Turn on the power of the headphones and the

Bluetooth

device.

No sound comes out / a faint sound

Turn up the volume of the headphones and the

Bluetooth

device.

Switch the output of the

Bluetooth

device to the

Bluetooth

connection.

Pairing is available on version 2.1+EDR or later of the communication system of the

Bluetooth

device.

Set profiles for the

Bluetooth

device. For procedures on how to set, refer to the operation

manual for the

Bluetooth

device.

Summary of Contents for ATH-SPORT4


















Search results

Summary of Contents for ATH-SPORT4

Reviews:

Related manuals for ATH-SPORT4

Brands by name

Popular brands

Audio Technica ATH-SPORT4, Instruction Booklet

Search results

Summary of Contents for ATH-SPORT4

Reviews:

Related manuals for ATH-SPORT4

Brands by name

Popular brands