9
Connecting via Bluetooth wireless technology
To connect the product to a Bluetooth device, the product needs to pair (register) with the device.
Pairing a Bluetooth device
• Read the user manual for the Bluetooth device.
• Place the Bluetooth device within 1 m (3.3') of the product to perform pairing correctly.
• To confirm the progress of the pairing process, wear the product while performing this procedure and listen for the
confirmation tone.
1. Remove this product from the charging case.
• The indicator lamp on the right will quickly flash in blue.
2. Use your Bluetooth device to begin the pairing process and search for the product.
When your Bluetooth device finds the product, “ATH-SPORT7TW” will be displayed on the device.
• For information about using your Bluetooth device, refer to the device’s user
manual.
• This product may be displayed as "ATH-SPORT7TW" or "BLE_ATH-
SPORT7TW". Select whichever name is displayed. If both names are displayed,
select "ATH-SPORT7TW".
3. Select “ATH-SPORT7TW” to pair the product and your Bluetooth device.
• Some devices may ask for a passkey. In this case, enter “0000”. The passkey
may also be called a passcode, PIN code, PIN number, or password.
• The product sounds a confirmation tone when pairing is complete.
About pairing
When connecting a new Bluetooth device, you need to pair it with the product. Once the Bluetooth device and the
product are paired, you do not need to pair them again.
However, in the following cases, pairing is necessary even if the Bluetooth devices have been paired previously.
• If the product is deleted from the Bluetooth device’s connection history.
• If the product is sent out for repair.
• When eight or more devices are paired. (This product can save the pairing information of up to seven devices.
When you pair with a new device after pairing with seven devices, pairing information for the device with the oldest
connection date will be overwritten by the information for the new device.)
100%
12:00
Bluetooth
ON
ATH-SPORT7TW
