Setup
AUDIO SETUP
When you open the AUDIO menu, you
will see the following picture:
Move
Select
“Dolby Digtial” means the Dolby digital
out type. There are “Bitstream” and
“PCM” to be selected.
Bitstream: When connecting to the
amplifier or other devices with the
Dolby Digital Decoder, DTS
Decoder or MPEG Decoder or
other devices, select this item.
PCM (Pulse Code Modulation):
When connect to the amplifier with
two channels digital stereo, select
this item.
When playing a DVD disc with
Dolby Digital and recorded by
MPEG1 or MPEG2 record system,
the DVD player will output the
audio in PCM2 playback mode.
“DTS” means “Date Transmission
System”. There are “Bitstream” and
“PCM” to be selected.
“Sample Freq.” means “Sample
Frequency”. Select the Sample Freq.
between 48kHz and 96kHz. The higher
the sample frequency is, the better the
output audio quality is.
“Digital Output” is to activate the
digital audio output on or off.