Administrator's Manual
5. Application Server-Specific Configurations
Version 1.4
95
July 2010
5.2
Configuring BLF for Asterisk
The configuration of the BLF feature is unique when the selected application server is Asterisk.
¾
To configure BLF for Asterisk application server:
1.
Access the Services page (
Configuration
tab >
Voice Over IP
menu >
Services
). The
figure’s callouts below correspond to the steps in this procedure:
Figure
5-2: BLF Configuration for Asterisk
2.
From the ‘Type’ drop-down list, select “Asterisk”.
3.
In the
BFL Support
group, configure the following:
a.
From the ‘Activate’ drop-down list (
voip/services/busy_lamp_field/enabled
parameter),
select “Enable”.
b.
(Optional) In the ‘BLF Subscription Period’ field
(
voip/services/busy_lamp_field/subscription_period
parameter), enter the interval
between BLF and SIP SUBSCRIBE messages.
Note:
The application server’s address is the same as the SIP Registrar address
defined by the parameter
voip/signalling/sip/sip_registrar/addr
(refer to Section
4.2.5.5.2
).
4.
Click
Submit
.
5.
Define speed dial keys with the BLF feature (refer to Section
3.5
).
Summary of Contents for 300HD Series
