Installation & Maintenance Manual
11. Installing and Configuring the SBA
Version 6.8
79
Microsoft Lync Server
11 Installing and Configuring the SBA
Once you are logged in to the SBA Management Interface, you can start configuring SBA,
as described in this section.
The SBA configuration is done in the Setup tab. For the configuration to be successful, it is
imperative that all Setup options are performed correctly and in sequence (according to
their order of appearance in the graphical user interface / GUI):
1.
Define IP Settings - See Section
on page
2.
Change Computer Name - See Section
3.
Change Admin Password - See Section
4.
Set Date and Time - See Section
on page
5.
Join to a Domain - See Section
on page
6.
Device Preparation - See Section
on page
7.
Cs Database Installation - See Section
on page
8.
on page
9.
Enable Replication - See Section
on page
10.
on page
11.
Lync Certificate - See Section
on page
12.
Start Lync Services - See Section
on page
13.
Configure Gateway and Test Calls - See Section
on page
14.
Test Lync Calls - See Section
on page
15.
Apply Security - See Section
16.
(Optional) Remote Control - See Section
on page
17.
(Optional) SNMP - See Section
18.
Complete SBA Setup - See Section
on page
If a task fails, ensure you correct it before performing additional tasks. When a task is
configured successfully, a check mark (green) appears alongside the option.
Note:
Initially, the Setup menu displays only the first few options (until you Join to a
Domain). The remaining options appear only after you successfully Join to the Active
Directory Domain.
Summary of Contents for Mediant 1000B SBA
