Session Border Controllers
21
Mediant 4000B SBC
Hardware Installation Manual
3. Physical Description
The MPM provides LEDs for indicating various operating status, as shown in the figure
below and described in the subsequent table.
Figure 3-6: MPM LEDs (e.g. MPM12B)
Table 3-5: MPM LEDs Description
Item #
LED
Color
State
Description
1
Green
On
Module in service.
-
Off
Module out of service.
Red
On
Booting up phase.
Green
On
Normal operation.
3
Green
On
Application running.
Yellow
On
Application is starting boot up.
-
Off
During booting up state.
4
Red
On
Out of service.
-
Off
Normal operation.
5
Blue
On
Blue hot-swap LED indicating that the AMC
module handle is pulled out. If this occurs,
push on the handle until it is flush with the
chassis (i.e. module locked in the slot).
-
Off
Module handle is locked (i.e., module is
securely installed in the slot).
Summary of Contents for Mediant 4000B SBC
Page 2: ......
