Session Border Controllers
55
Mediant 4000B SBC
Hardware Installation Manual
6. Hardware Maintenance
3.
Hold the OSN module in the correct orientation as shown in the figure below, and then
gently insert the module into the upper slot, sliding it along the slot's guide rails until it
makes contact with the card-edge connector located on the backplane.
Figure 6-8: Inserting OSN Module
4.
Push the module's handle until it clicks firmly in to engage the module with the slot
rails.
5.
Install the HDMX Module:
b.
Hold the HDMX module in the correct orientation as shown in the figure below,
and then gently insert the module into the upper slot, sliding it along the slot's
guide rails until it makes contact with the card-edge connector located on the
backplane.
Figure 6-9: Inserting HDMX Module
6.
Push the module's handle until it clicks firmly in to engage the module with the slot
rails.
7.
Power up the device.
Summary of Contents for Mediant 4000B SBC
Page 2: ......
