6
|
P a g e
Assigning an IP Address
Use the device's factory default IP address (192.168.0.2/24 and Default Gateway 0.0.0.0) to initially access the
device's Web-based management interface and then change it to suit your network's addressing scheme for
subsequent connectivity.
1.
Using a CAT-5e or CAT-6 straight-through RJ-45 Ethernet cable, connect Ethernet port GE
1
or GE
2
,
located on the SBC module on the device's front panel, to your computer's LAN port.
2.
Change the IP settings of your computer to correspond with the device's default IP address and subnet
mask.
3.
On your computer, open a standard Web browser (for example, Google Chrome), and then in the URL
field, enter the device's default IP address; the Web Login screen appears:
4.
Type in the default username (
Admin
) and password (
Admin
), and then click
Log In
.
5.
Open the IP Interfaces table (
Setup
menu >
IP Network
tab >
Core Entities
folder >
IP Interfaces
).
