User's Manual
134
Document #: LTRT-10375
Mediant 500 MSBR
5.
Verify that the device has received the correct date and time from the NTP server. The
date and time is displayed in the 'UTC Time' read-only field under the Time Zone
group.
Note:
If the device does not receive a response from the NTP server, it polls the NTP
server for 10 minutes. If there is still no response after this duration, the device
declares the NTP server as unavailable and raises an SNMP alarm
(acNTPServerStatusAlarm). The failed response could be due to incorrect
configuration.
14.2 Configuring Date and Time Manually
You can manually configure the date and time of the device instead of using an NTP server
(as described in Configuring Automatic Date and Time using SNTP on page 133).
To manually configure the device's date and time through the Web interface:
1.
Open the Time & Date page (
Setup
menu >
Administration
tab >
Time & Date
), and
then scroll down to the Local Time group:
Figure
14-2: Configuring Manual Date and Time
2.
Configure the current date and time of the geographical location in which the device is
installed:
•
Date:
♦
'Year' in
yyyy
format (e.g., "2015")
♦
'Month' in
mm
format (e.g., "3" for March)
♦
'Day' in
dd
format (e.g., "27")
•
Time:
♦
'Hours' in 24-hour format (e.g., "4" for 4 am)
♦
'Minutes' in
mm
format (e.g., "57")
♦
'Seconds' in
ss
format (e.g., "45")
3.
Click
Apply
; the date and time is displayed in the 'UTC Time' read-only field.
Note:
•
If the device is configured to obtain date and time from an NTP server, the fields
under the Local Time group are read-only, displaying the date and time received
from the NTP server.
•
After performing a hardware reset, the date and time are returned to default
values and thus, you should subsequently update the date and time.
14.3 Configuring the Time Zone
You can configure the time zone in which the device is deployed. This is referred to as the
Coordinated Universal Time (UTC) time offset and defines how many hours the device is
Summary of Contents for Mediant 500 MSBR
