9
|
P a g e
Cabling the Device
Cabling depends on your ordered hardware interfaces, for example, the type of WAN interface.
1.
Connect the device's WAN port interface to your router.
2.
Connect any phone, fax or other PSTN equipment to any of the analog port interfaces (FXS).
3.
Insert the DC plug that is located at the end of the power cord of the supplied power adapter into the
device's power socket located on the rear panel and labeled
POWER
. Plug the power adapter directly
into a standard electrical wall outlet; the
Power
LED turns on (green).
4.
You should now be able to make and receive calls, based on your local plan with your service provider.
