Version 6.2
599
February 2011
SIP User's Manual
8. IP Telephony Capabilities
After manipulation, SAS registers the user in its database as follows:
AOR:
976653434@10.33.4.226
Associated AOR:
3434@10.33.4.226 (after manipulation, in which only the four digits
from the right of the URI user part are retained)
Contact:
976653434@10.10.10.10
The procedure below describes how to configure the manipulation example scenario above
(relevant
ini
parameter is SASRegistrationManipulation):
¾
To manipulate incoming Request-URI user part of REGISTER message:
1.
Open the 'SAS Configuration' page (
Configuration
tab >
VoIP
menu >
SAS
>
Stand
Alone Survivability
).
2.
In the SAS Registration Manipulation table, in the 'Leave From Right' field, enter the
number of digits (e.g., 4) to leave from the right side of the user part. (The 'Leave
From Right' field defines the number of digits to retain from the right side of the user
part; all other digits in the user part are removed.)
Figure
8-115: Manipulating User Part in Incoming REGISTER
3.
Click
Submit
.
Summary of Contents for Mediant 800 MSBG
