SIP User's Manual
28
Document #: LTRT-12804
Mediant 800 MSBG
2.2.1.1 Configuring Data-Routing LAN Interface
The default IP addresses of the LAN data-routing interface is listed in the table below.
Table
2-1: Default LAN Data-Routing IP Address
Parameter
Default Value
IP Address
192.168.0.1
Subnet Mask
255.255.255.0
Default Gateway
0.0.0.0
Note:
The data-routing interface's IP address must be in the same subnet as the
VoIP and Management interface.
¾
To define the device's LAN data-routing IP address:
1.
Access the 'Connections' page (
Configuration
tab >
Data
menu >
Data System
>
Connections
).
Figure
2-1: Connections Page
2.
Click the
Edit
button corresponding to the "LAN Switch VLAN 1" connection, and
then click the
Settings
tab.
3.
In the 'IP Address' and 'Subnet Mask' fields, enter the required IP address and subnet
respectively.
Figure
2-2: Defining LAN Data Routing IP Address
4.
Click
OK
to save your settings.
Summary of Contents for Mediant 800 MSBG
