CHAPTER 7 SNMP Traps
Mediant 800 SBC | SNMP Reference Guide
Alarm
acHASystemFaultAlarm
Critical
HA feature has
failed to initialize
due to some
configuration
error.
"SYS_HA: HA
Remote address
not configured,
No HA system."
Need to configure a valid
'HA Remote Address'.
"SYS_HA: HA
Remote address
and
Maintenance IF
address are not
on the same
subnet, No HA
system."
Need to configure a valid
Maintenance network
interface and 'HA Remote
Address'.
"SYS_HA: HA
Remote address
and
Maintenance IF
address should
be different, No
HA system."
Need to configure a valid
Maintenance network
interface and 'HA Remote
Address'.
HA feature is
active, but the
system is not
operating in HA
mode.
"Switch-Over:
Reason = Fatal
exception error"
HA was lost due to
switchover and should
return automatically after a
few minutes. Corrective
action is not required.
"Switch-Over:
Reason = SW
WD exception
error"
HA was lost due to
switchover and should
return automatically after a
few minutes. Corrective
action is not required.
"Switch-Over:
Reason = System
error"
HA was lost due to
switchover caused by a
general system error and
should return automatically
after a few minutes.
Corrective action is not
required.
"Switch-Over:
Reason = Eth link
HA was lost due to
switchover. Reconnect the
- 106 -
