Installation & Operation Manual
652
Document # LTRT-92224
Mediant 8000
Parameter Name
Type
Provisioning
Type
Description
Starting Phone
Number
String
Up to 19 chars.
Instant
The first telephone number assigned to
the first channel defined in the 'Channels'
fields. Subsequent channels are assigned
the next consecutive phone number.
If the 'Phone Number' field includes
alphabetical characters and the phone
number is defined for a range of channels
(e.g., 1-4), then the phone number must
end with a number (e.g., 'user1').
Note: This field is optional. The logical
numbers defined in this field are used
when an incoming PSTN / PBX call
doesn't contain the calling number or
called number (the latter being determined
by the parameter 'Replace Empty Dst
With Port Number'), these numbers are
used to replace them.
These logical numbers are also used for
B-channel allocation for IP-to-Tel calls, if
the trunk group's 'Channel Select Mode' is
set to 'By Phone Number' (in Trunk Group
Setting Table).
Summary of Contents for Mediant 8000
