manualshive.com logo in svg

AudioCodes MediaPack MP-112, User Manual

The AudioCodes MediaPack MP-112 is a versatile VoIP gateway that connects traditional telephony equipment to IP-based communication systems. It offers exceptional voice quality and advanced features for seamless integration. Ensure a smooth installation and configuration by downloading the free user manual from 88.208.23.73:8080, your ultimate resource for product documentation.

Share
Download
background image

User's Manual 

524 

Document #: LTRT-65417 

 

MP-11x & MP-124 

 

Parameter 

Description 

If the Via header includes the 'rport' parameter without a port value, the 
destination port of the response is the source port of the incoming 
request. 
If the Via header includes 'rport' with a port value (e.g., rport=1001), the 
destination port of the response is the port indicated in the 'rport' 
parmeter. 

 
EMS: X Channel Header 

[XChannelHeader]

 

Determines whether the SIP X-Channel header is added to SIP 
messages for providing information on the physical channel on which 
the call is received or placed.  

 

[0]

 Disable = (Default) X-Channel header is not used. 

 

[1]

 Enable = X-Channel header is generated by the device and sent 

in INVITE messages and 180, 183, and 200 OK SIP responses. The 
header includes the channel, and the device's IP address.  
For example, 'x-channel: DS/DS1-1/8;IP=192.168.13.1', where: 

 

'DS/DS-1' is a constant string 

 

'1' is a constant string 

 

'8' is the channel (port) 

 

'IP=192.168.13.1' is the device's IP address 

Web/EMS: Progress 
Indicator to IP 

[ProgressIndicator2IP]

 

For Analog (FXS/FXO) interfaces: 

 

[-1

] Not Configured = (Default) Default values are used. The default 

for FXO interfaces is 1; The default for FXS interfaces is 0. 

 

[0] 

No PI = For IP-to-Tel calls, the device sends a 180 Ringing 

response to IP after placing a call to a phone (FXS) or PBX (FXO). 

 

[1] 

PI = 1, 

[8] 

PI = 8: For IP-to-Tel calls, if the parameter 

EnableEarlyMedia is set to 1, the device sends a 183 Session 
Progress message with SDP immediately after a call is placed to a 
phone/PBX. This is used to cut-through the voice path before the 
remote party answers the call. This allows the originating party to 
listen to network Call Progress Tones (such as ringback tone or 
other network announcements). 

Note:

 This parameter can also be configured per IP Profile (using the 

IPProfile parameter) and Tel Profile (using the TelProfile parameter). 

[EnableRekeyAfter181]

 

Enables the device to send a Re-INVITE with a new (different) SRTP 
key (in the SDP) upon receipt of a SIP 181 response ("call is being 
forwarded").  

 

[0]

 = Disable (default) 

 

[1]

 = Enable 

Note:

 This parameter is applicable only if SRTP is used. 

[NumberOfActiveDialogs
]

 

Defines the maximum number of concurrent, outgoing SIP REGISTER 
dialogs. This parameter is used to control the registration rate. 

The valid range is 1 to 5. The default value is 5. 

Notes: 

 

 

Once a 200 OK is received in response to a REGISTER message, 
the REGISTER message is not considered in this maximum count 
limit. 

 

This parameter applies only to outgoing REGISTER messages (i.e., 
incoming is unlimited). 

Web/EMS: Default 
Release Cause 

[DefaultReleaseCause]

 

Defines the default Release Cause (sent to IP) for IP-to-Tel calls when 
the device initiates a call release and an explicit matching cause for this 
release is not found.  

The default release cause is NO_ROUTE_TO_DESTINATION (3). 

Summary of Contents for MediaPack MP-112















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MediaPack MP-112

3Com OfficeConnect 3C855 Setting Up preview
OfficeConnect 3C855
Brand: 3Com Pages: 4
TCS FBI6119-0400 Manual preview
FBI6119-0400
Brand: TCS Pages: 56
Sangoma Netborder SS7 Quick Start Manual preview
Netborder SS7
Brand: Sangoma Pages: 4
D-Link DFL-M510 User Manual preview
DFL-M510
Brand: D-Link Pages: 153
D-Link DCH-G020 User Manual preview
DCH-G020
Brand: D-Link Pages: 14
ICC 100316044 Installation Manual preview
100316044
Brand: ICC Pages: 54
Hybertone HT-322 User Manual preview
HT-322
Brand: Hybertone Pages: 33
ClimaCheck NX400 Hardware Manual preview
NX400
Brand: ClimaCheck Pages: 41
SELECTRONIX SLC4075 Series Installation & Operating Manual preview
SLC4075 Series
Brand: SELECTRONIX Pages: 28
Wireless Devices P-900 Operation Manual preview
P-900
Brand: Wireless Devices Pages: 32
Busch-Jaeger Busch-free@home DG-M-1.16.11 Product Manual preview
Busch-free@home DG-M-1.16.11
Brand: Busch-Jaeger Pages: 35
ActionTec GT704-WG Specifications preview
GT704-WG
Brand: ActionTec Pages: 2
Cradlepoint COR IBR350 Manual preview
COR IBR350
Brand: Cradlepoint Pages: 148
SmartRG SR616ac Quick Start Manual preview
SR616ac
Brand: SmartRG Pages: 16
ZyXEL Communications AMG1001-T Series User Manual preview
AMG1001-T Series
Brand: ZyXEL Communications Pages: 183
Telstra Gateway Max Quick Start Manual preview
Gateway Max
Brand: Telstra Pages: 7
Black Box IPBX1224 Installation Manual preview
IPBX1224
Brand: Black Box Pages: 52
Janus AC-4CM10-650-F-20-000 Installation & Operation Manual preview
AC-4CM10-650-F-20-000
Brand: Janus Pages: 8

Brands by name

Popular brands

Load more brands