manualshive.com logo in svg

AudioCodes MediaPack MP-112, User Manual

The AudioCodes MediaPack MP-112 is a versatile VoIP gateway that connects traditional telephony equipment to IP-based communication systems. It offers exceptional voice quality and advanced features for seamless integration. Ensure a smooth installation and configuration by downloading the free user manual from 88.208.23.73:8080, your ultimate resource for product documentation.

Share
Download
background image

Version 6.6 

603 

MP-11x & MP-124 

User's Manual 

 

43. Configuration Parameters Reference 

 

43.10.13 

Number Manipulation Parameters 

The number manipulation parameters are described in the table below. 

Table 

 

43-59: Number Manipulation Parameters 

Parameter 

Description 

Web: Copy Destination Number 
to Redirect Number 
EMS: Copy Dest to Redirect 
Number 

[CopyDest2RedirectNumber]

 

Determines whether the device copies the called number to the 
outgoing SIP Diversion header for Tel-to-IP calls. Therefore, the 
called number is used as a redirect number. Call redirection 
information is typically used for Unified Messaging and voice mail 
services to identify the recipient of a message. 

 

[0]

 Don't copy = (Default) Disable. 

 

[1]

 Copy after phone number manipulation = Copies the called 

number after manipulation. The device first performs Tel-to-IP 
destination phone number manipulation (i.e., on the SIP To 
header), and only then copies the manipulated called number to 
the SIP Diversion header for the Tel-to-IP call. Therefore, with 
this option, the called and redirect numbers are identical.  

 

[2]

 Copy before phone number manipulation = Copies the called 

number before manipulation. The device first copies the original 
called number to the SIP Diversion header, and then performs 
Tel-to-IP destination phone number manipulation. Therefore, 
this allows you to have different numbers for the called (i.e., SIP 
To header) and redirect (i.e., SIP Diversion header) numbers. 

Note: 

This parameter can also be configured in an IP Profile. 

Web/EMS: Add Hunt Group ID 
as Prefix 

[AddTrunkGroupAsPrefix]

 

Determines whether the Hunt Group ID is added as a prefix to the 
destination phone number (i.e., called number) for Tel-to-IP calls. 

 

[0] 

No = (Default) Don't add Hunt Group ID as prefix. 

 

[1] 

Yes = Add Hunt Group ID as prefix to called number. 

Notes:

 

 

This option can be used to define various routing rules. 

 

To use this feature, you must configure the Hunt Group IDs (see 
Configuring Endpoint Phone Numbers on page 

203

). 

Web: Add Trunk ID as Prefix 
EMS: Add Port ID As Prefix 

[AddPortAsPrefix]

 

Determines whether or not the  port number  is added as a prefix to 
the called (destination) number for Tel-to-IP calls. 

 

[0] 

No (Default) 

 

[1] 

Yes 

If enabled, the device adds the following prefix to the called phone 
number: port number  (single digit in the range 1 to 8for 8-port 
devices, two digits in the range 01 to 24 for MP-124). 

This option can be used to define various routing rules. 

Web/EMS: Add Trunk Group ID 
as Prefix to Source 

[AddTrunkGroupAsPrefixToS
ource]

 

Determines whether the device adds the Hunt Group ID (from 
where the call originated) as the prefix to the calling number (i.e. 
source number). 

 

[0]

 No (default) 

 

[1] 

Yes 

Web: IP to Tel Remove Routing 
Table Prefix 
EMS: Remove Prefix 

[RemovePrefix]

 

Determines whether or not the device removes the prefix (as 
configured in the IP to Hunt Group Routing Table - see 'Configuring 
IP to Hunt Group Routing Table' on page 

230

) from the destination 

number for IP-to-Tel calls, before sending it to the Tel. 

Summary of Contents for MediaPack MP-112















































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MediaPack MP-112

ADTRAN Atlas 830 Quick Start Manual preview
Atlas 830
Brand: ADTRAN Pages: 2
Deb 1135-100 Installation & Operation Manual preview
1135-100
Brand: Deb Pages: 4
VBOX XTi4144 Full User Manual preview
XTi4144
Brand: VBOX Pages: 90
Pulse Secure PSA300 Hardware Manual preview
PSA300
Brand: Pulse Secure Pages: 39
Nitgen Fingkey Access User Manual preview
Fingkey Access
Brand: Nitgen Pages: 36
JBM electronics C120F Quick Start Manual preview
C120F
Brand: JBM electronics Pages: 29
SAGEMCOM Swan F5366s User Manual preview
Swan F5366s
Brand: SAGEMCOM Pages: 60
Alpha Technologies BlueGate ISDN Installation And Programming Instruction Manual preview
BlueGate ISDN
Brand: Alpha Technologies Pages: 25
HOOC Connect X Instruction Manual preview
Connect X
Brand: HOOC Pages: 18
Digicom VoiceGATE 8D5499 User Manual preview
VoiceGATE 8D5499
Brand: Digicom Pages: 29
wowvision miniVEOS User Manual preview
miniVEOS
Brand: wowvision Pages: 145
VBOX XTi Series Quick Installation Manual preview
XTi Series
Brand: VBOX Pages: 3
VBOX XTI 3452 Installation Instructions Manual preview
XTI 3452
Brand: VBOX Pages: 6
gefran R-ETM100 Installation And Operation Manual preview
R-ETM100
Brand: gefran Pages: 2
Four-Faith F8L10GW-L User Manual preview
F8L10GW-L
Brand: Four-Faith Pages: 32
Daikin MCS341-DS1-111 Installer'S Reference Manual preview
MCS341-DS1-111
Brand: Daikin Pages: 44
IBM 2867-C20 Installation And Setup Instructions preview
2867-C20
Brand: IBM Pages: 20
RADVision VIU-323 Quick Start Manual preview
VIU-323
Brand: RADVision Pages: 21

Brands by name

Popular brands

Load more brands