DSP-2600
P. 8
ENGLISH VERSION
4. Input Gain Setting:
Parameter Gain, adjust range: -40.0dB-+6.0dB,
Step pitch is 0.1dB. Each channel has unat-
tached gain control.
Example
1.
Press A channel key about 3 seconds till the
yellow light display, into
Edit Status.
2. Press “
<BACK or “NEXT>”, switch to Gain.
Display next:
3. Turn the first knob of
“PARA” to change the value.
(Turn the knob clockwise, the value increase:
Turn the knob withershins, the value decrease.)
5. EQ setting:
Parameter EQ, IN A-IN D Each channel can set 8
parameter
EQ (EQ1-EQ8).
A: At parameter status:
Freq: 20Hz-20KHz
Gain:
-30dB-+15dB
Bandwidth: 0.05/Oct-3/Oct
B: At Lo_Shelf, Hi-shelf status:
Freq: 20Hz-20KHz
Gain: -30dB-+15dB
Bandwidth:
0.05/Oct-3 /Oct
Example
1.
Press A channel key about 3 seconds till the
yellow light display, into
Edit Status.
2. Press “
<BACK or “NEXT>”, switch to EQ, into
“Parameter” setting status.
Display next:
3. Turn the first knob of
“PARA”, switch to “Lo--
shelf” or “Hi-shelf” setting status, Press EN-
TER
to confirm.
Display next:
