DSP-4800W
P. 10
ENGLISH VERSION
2. Signal Source Setting:
Example
1. Press
OUT1 channel for 3 seconds till the yel-
low light display, into
Edit Status of OUT1.
Display next:
2.
Turn the first knob “
PARA” to select ON or
OF, then press ENTER to confirm.
3. Output Gain Setting:
Parameter Gain, adjust range: -40.0dB-+15.0dB,
Step pitch is 0.1dB. Each channel has unat-
tached gain control.
Example
1.
Press
OUT1 channel for 3 seconds till the yel-
low light display, into
Edit Status of OUT1.
2. Press “
<BACK or “NEXT>”, switch to Gain.
3. Turn the first knob of
“PARA” to change the value.
(Turn the knob clockwise, the value increases:
Turn the knob withershins, the value decreases.)
Display next:
