Operating the Telephone
27
Programming the basic settings
By programming the basic settings, you adapt the handset settings
to suit your individual needs. Press the
button to cancel the
process. If no button is pressed over a period of 15 sec., the pro-
cess is automatically terminated and none of the modifications
made are saved. Proceed as follows:
1. Activate the programming process
3 sec
,
,
2. Volume and ringing melody for external calls
y
/
z
, OFF to 5 ,
1
to
5
,
,
3. Volume and ringing melody for internal calls
y
/
z
, OFF to 5 ,
1
to
5
,
,
4. Date and time
Use the
y
/
z
buttons to select Day, Month and Time
and change them as required using
0
to
9
,
,
5. Tone dialling / Pulse dialling
y
/
z
, 1= Tone, 2= Pulse,
,
6. Flash time
y
/
z
, 1= 100 ms, 2= 300 ms,
,
7. Base station volume and ringing melody
y
/
z
, OFF to 5 ,
1
to
5
,
.
Restoring the default settings
1. Remove the batteries from the handset.
2. Reinsert the batteries in the handset then immediately press
and hold the
*
button until
8888888
appears in the
display.
3. Press the
button for 3 seconds until you hear an acoustic
confirmation signal. After a certain time, the telephone switches
to Standby mode.
