26
Note
·
If you open the cover during playback the ART G3 takes a short
moment to bring the disc to a complete stop. Please wait until the disc
stops turning before you remove the disc.
·
The cover has to be closed completely in order to playback a disc.
·
Always use the included stabilizer to fix the disc on the spindle. Oth-
erwise the disc and/or the unit might suffer damage.
·
Never
load more than one disc at a time, and never use any additional
stabilizers!
·
Do not use any non-standard shaped discs available on the market
because it may damage the unit.
·
If you set the option
Set AutoPlay
to
disc change only
or
power on & disc change
, the ART G3 starts playback auto-
matically as soon as you inserted a disc and closed the cover (refer to
section '
Set AutoPlay
' on page 55).
6.3
Control elements on the front panel
The front panel has 4 keys for controlling the ART G3 (refer to section
'
Overview front panel
Overview ' on page 7). With these keys you can
control all basic playback functions as well as all setup options in the
Global Setup
menu.
power
Switch on /off the unit.
stop / set
Push the key shortly to stop playback. Keep the key
pushed for at least 2 seconds to enter and navigate
through the
Global Setup
menu.
back / pause
Push the key shortly to skip back to the beginning of the
current track. Push the key again to skip to the start of
previous tracks. Keep the key pushed for at least 2 sec-
onds to pause playback. To continue playback press the
key for at least 2 seconds again.
skip / play
Press key once to skip to the beginning of the next track.
Press again to skip to the start of further tracks.
