10
·
If you connect the mains cord please make sure that mains switch
11 at the back panel is switched off
·
Never pull the mains plug while the CAT is switched on! Before you
pull the mains cord off its socket 9 at the back panel, power down the
unit to stand-by mode and switch off the unit using mains switch 11 .
Only in cases of extended absence – like vacations – or if massive trouble
on the mains power is to be expected you should switch off the CAT
from the mains using mains switch 11 . To disconnect the unit com-
pletely from mains pull the mains plug.
Tip
·
The use of high quality mains cords could improve sound quality.
Ask your local dealer for more information.
4.3 Orientation of mains plug
The correct polarization of mains is important for reasons of audio clarity
and stability. Please connect the mains cord so that the hot pin of the wall
outlet is connected to the pin of the mains input 9 marked
phase
10 .
Note
·
While powering up your Audionet CAT from stand-by mode by us-
ing the
power
key on the front panel, the unit detects a wrong polari-
zation of the mains plug and issues the warning:
Attention: Mains
Phase incorrect!
in the display of the front panel. In this case switch off the unit and
flip the mains plug in the wall outlet (see section
'Mains phase detec-
tion
' on page 14).
Summary of Contents for Cat
Page 1: ...1 FM AM Stereo Tuner User s Manual ...
Page 2: ...2 ...