11
5 Inputs and outputs
Important
·
During connecting or removing to/from your pre amplifier the
CAT as well as the pre amplifier have to be switched off to avoid
damage on the CAT, pre amplifier and/or any other connected
unit.
·
Please make sure that all cables are in absolute best conditions!
Broken shields or short-cut cables could damage the CAT and/or
any other connected unit.
5.1 Antenna inputs
On the back panel are two antenna inputs. For FM reception connect your
FM antenna or cable to antenna input
FM
1 .
For AM reception connect your AM antenna to the clip connectors of
antenna input
AM
2 .
5.2 Audio outputs
The CAT is equipped with a pair of Cinch (Line) outputs 5 and 6 as well
as a pair of balanced (XLR) outputs 4 and 7 . Use the Cinch outputs to
connect the CAT to your pre amplifier using high quality Cinch cables.
Alternatively, you may connect the CAT to your pre amplifier using the
balanced (XLR) outputs in case your pre amplifier does not support
Cinch (Line) inputs.
Tip
Pinning of the balanced (XLR) outputs:
The pins are marked with numbers as in the picture above.
5.3 Audionet Link
For your convenience, the CAT can be switched on/off remotely by one
of Audionet's multi-channel pre amplifiers (e.g. MAP or MAP 1) as well
1: Ground
3: Negative
2: Positive
Summary of Contents for Cat
Page 1: ...1 FM AM Stereo Tuner User s Manual ...
Page 2: ...2 ...