13
6 Usage
The front panel has four keys to control all functions of the CAT. For
more comfort please use the optional Audionet System Remote Control
Harmony One
(see section '
Audionet System
Remote Control' on page
33).
6.1 Powering up
First of all, please make sure your CAT is connected correctly to your pre
amplifier and to mains power (see section '
Installation and power supply
'
on page 9 and section '
Inputs and outputs
' on page 11).
The CAT is a stand-by unit. Please operate the mains switch 11 on the
back panel. The display shows a welcome message for a brief moment.
After that the CAT is in stand-by mode. The display will indicate the
stand-by mode either with the text
off
or a small dot (see section '
Set
Off-Text
' on page 32).
Only in cases of extended absence (like vacations) or if massive trouble
on the mains power is to be expected (e.g. thunder storms) it is recom-
mended to disconnect the CAT from the mains. While the CAT is in
stand-by mode, operate mains switch 11 on the back panel. The display
will go dark. To disconnect the PRE1 G3 from mains completely, you
have to pull the mains cord off the mains jack 9 .
Important
·
Never pull the mains plug while the CAT is switched on! Before
you pull the mains cord off its socket 9 at the back panel, power
down the unit to stand-by mode and switch off the unit using
mains switch 11 .
6.2 Switching on and off
To power up the CAT from stand-by mode, press the
power
key on the
front panel. The CAT issues the message:
WAKING UP...
In case the mains plug has the incorrect polarization a warning will ap-
pear in the display (see section '
Mains phase detection
' on page 14). After
that the unit is in normal operating mode and ready to use.
If you would like to switch off the unit, please press the
power
key on the
front panel. First, the display shows the message:
GOING TO SLEEP..
which then will be replaced by the stand-by text (see section '
Set Off-Text
'
on page 32). The unit is now in stand-by mode.
Summary of Contents for Cat
Page 1: ...1 FM AM Stereo Tuner User s Manual ...
Page 2: ...2 ...