22
Set AutoStart:
To enable the AutoStart option press
key ('
On
'), to disable press
key ('
Off
'). If
AutoStart option is active, the MAP will start up automatically when connected to
mains. Use this option, if you want to start up the MAP by timer.
Set RF-Demodulator:
If the optional RF-Demodulator-Card is installed, make sure this option is activated by
pressing the
key ('
available
'). Otherwise press
key to have this option
disabled ('
missing
').
Note
: The RF-Demodulator-Card is optional and used to receive an AC-3 signal from a
LaserDisc-Player (connect the RF-output of your LaserDisc-Players to
DIGITAL IN 4
9).
Note:
Only if you selected '
RF-Demodulator = missing
', digital input
DIGITAL
IN 4
9 can be used as a normal input for digital data of DVD or CD player etc.
Ex.8ch. Input Is:
Use keys
and
to specify, if signals input to the 8-ch. analog input are buffered
or fed in directly to the volume control circuit. Press key
for direct input. The
display will show '
direct
'. Press key
for buffered input. The display will show
'
buffered
'.
Use buffered input, if the output impedance of a source connected to the 8-ch. analog
input is greater than 100 Ohms.
Note:
If you connect Audionet devices to the 8-ch. analog input, the input signals do not
need to be buffered. In this case use option '
direct
'.
Dolby D EX Mode:
Use keys
and
to select, if for Listening Mode '
Surround
', Dolby Surround
EX encoded bitstreams are recognized and played back in Dolby Digital EX mode
automatically, or if they are played back like plain Dolby Digital bitstreams:
auto on:
The 'Dolby Surround EX encoded' flag in the bitstream is recognized
and the playback mode is set to Dolby Digital EX automatically.
never on:
The 'Dolby Surround EX encoded' flag in the bitstream is ignored. The
bitstream is decoded in Dolby Digital mode.
Note:
This setting refers to Listening Mode '
Surround
'
only
! For Listening Mode
'
Audionet D8
' all Dolby Digital bitstreams are decoded as '
Dolby Digital +
Pro Logic IIx
' independent from the flag 'Dolby surround EX encoded'. The user
settings of function '
Dolby Pro Logic IIx Mode for Multi-Channel
'
apply (see above). See also table '
Overview Listening Modes
'.