32
Th
is
u
ni
t
m
us
t
be
e
ar
th
ed
.
A
ud
io
ne
t
EP
S
on
ly
.
N
EG
.
le
ft
ANALOG OUTPUTS
VIDEO OUT
VIDEO IN
IN 3
IN 4
IN 2
IN 1
S-VIDEO 1
S-VIDEO 4
S-VIDEO 3
S-VIDEO 2
S-VIDEO 1 S-VIDEO 2
OUT 1
OUT 2
VGA
Y/R
/G
/B
C
C
R
B
DIGITAL
OUT
(OSD)
(V
sy
nc
)
(H
sy
nc
)
IN
IN
IN
OUT
OUT
OUT
OUT
OPTICAL
Connection diagram 'RGB+sog Video In':
If your video source has a RGB video output with the Sync signals provided on the
Green line ('Sync On Green'), connect the three lines R, G+Sync and B to MAP
according to the diagram:
R G B
from video output of video source
+ Sync
Video outputs Progressive Scan Card:
The output signal of the Progressive Scan Card is available at video outputs 1 or 2. The
user can choose between the two output video formats YUV and RGB by menu setup.
The selection works on both video outputs 1 and 2.
If you are on screen page no. 5 of the device menu MAP of the remote control, press
keys:
Video Setup
à
à
to get to function '
Set Progressive Output
'. Now use keys
and
to
select desired video output format:
Y U V
Video outputs 1 and 2 provide a progressives Component or YUV signal
(refer to connection diagram below).
R G B
Video outputs 1 and 2 provide a progressive RGB signal.
Note:
Before you can use the RGB video output, you have to select the
correct output mode for the Sync signals (please refer to connection diagram
and detailed description below)!
Warning:
Only for the RGB video output mode it is necessary to select the correct Sync
output mode using function '
Set Video Out
'. If you are on screen page
no. 5 of the device menu MAP of the remote control, press the following
keys to enter the function:
Video Setup
à