14
Important
•
The option
Set Digital Output Mode
has to be set to
active
in
order to use the digital outputs OUT 1 to OUT 4 of your PLANCK. All digital
outputs of the PLANCK are switched off, if the setting
disabled
is selected
(refer to section 'Set digital output mode' on page 49).
The following table does list the digital output formats, which are available at the
digital audio outputs of the PLANCK.
Digital Output
Mode
OUT 1
SPDIF
OUT 2
SPDIF
OUT 3
AES/EBU
OUT 4
op-
tical
enabled
44.1kHz /
16bit
Stereo
PCM
44.1kHz /
16bit
Stereo
PCM
44.1kHz /
16bit
Stereo
PCM
44.1kHz /
16bit
Stereo
PCM
disabled
no signal
no signal
no signal
no signal
Important
•
Do not
use any jumpers to short-circuit the digital outputs, if none of the
digital outputs are used. Select the setting
disabled
of the option
Set
Digital Output Mode
instead in order to switch all digital outputs off
(refer to section 'Set digital output mode' on page 49).