20
Note
•
The activation signal is passed to further Audionet units daisy chained to the
Audionet Link output of your PLANCK with a slight delay to avoid all units
powering up at the same time – preventing an overload of your mains fuse.
First the control output OUT 1 is activated, afterwards OUT 2 is
switched on.
•
The PLANCK may still be switched on or off manually at any time by using
the key on the front panel or the remote control.
Important
•
If the option
Set AutoOff
has the value
shut off in 30 min
, the
PLANCK will power down to stand-by mode automatically 30 minutes after
the disc has stopped or after a key is used on the front panel as well as the
remote control. This function works independently from a preamplifier that
is connected via Audionet Link, i.e. the PLANCK shuts down automatically
even if the preamplifier is still switched on (refer to section 'Set AutoOff' on
page 51).