41
to inform that this time is not available on the disk and that a playback at the
desired time is not possible.
•
Correct a wrong time entry by simply typing in available and correct time
values. The currently selected digit is always switched to the first digit. The
other digits are shifted one digit to the left when you press the
7
key. In this
case, the first digit is always reset to '0'.
9.5
Program playback
Use this function to compile a playlist. Tracks will be played in the order they
were programmed in the playlist.
Make sure the playback has stopped. Press the setup key
ä
on the Audionet
Metal Remote Control for five times to go to the Playback Option
Edit Pro-
gram
for compiling a playlist. While in program mode, the display shows the
following information:
The first line of the display indicates that the PLANCK is now in the editing pro-
grams/playlists mode.
The second line shows the number of the current program step as well as the
total number of program steps which are so far on the playlist. Additionally, the
number of the track which is currently occupying the chosen program step is
indicated. The playlist in the above example consists of 19 program steps in total
and step 19 is occupied by track number 2.
The third line informs about the total playing time of the playlist. The total playing
time is 47 minutes and 13 seconds in the above example.
The forth line in shows the number of the track which is currently selected to be
added to the next program step of the playlist. In this example it is track no. 7.
►
Edit Program
◄
Track 02 -> 19 of 19
Prog. Time: 47 min 13 sec
Add Track: 07
