49
10.1
Set digital input
Press the
key once for at least 2 seconds to select the active digital input
of the PLANCK. Use the
and
keys to select the preferred digital
input.
disabled
All digital inputs of the PLANCK are switched off.
IN 1 (electrical)
Use this option to activate the digital input
IN 1 .
IN 2 (USB Audio 2.0)
Use this option to activate the USB Audio 2.0 in-
put IN 2 .
IN 3 (optical)
Use this option to activate the optical input
(Toslink) IN 3 .
Tip
•
Use the setup key
ä
of the Audionet Metal Remote Control to get to the
menu item
Set Digital Input
. Use the
9
and
:
keys to select the
preferred digital input.
10.2
Set digital output mode
Press the
key long twice to adjust the output format of the digital outputs
of the PLANCK. Use the
and
keys to select the output format.
active
All digital outputs are active. Use this setting for sending digital
audio data from the PLANCK to a preamplifier that is equipped
with a digital audio input, e.g. Audionet DNx or Audionet MAP 1.
disabled
All digital outputs are disabled. Select this option if none of the
digital outputs of the PLANCK are used.