50
Important
•
Do not
short-circuit the digital outputs with any jumpers if they are not
used. Select the setting
disabled
of the option
Set Digital Output
Mode
instead in order to to switch off all digital outputs.
Tip
•
Use the setup key
ä
of the Audionet Metal Remote Control to get to the
menu item
Set Digital Output Mode
. Press the
9
and
:
keys to
select the digital output format.
10.3
Set display brightness
Press the
key long for three times to adjust the brightness of the display.
Use the
and
keys to set the desired brightness.
Important
•
The long-term use of the maximum brightness value (setting to 100%) may
cause extended signs of wear resulting in a decay of contrast or brightness of
individual pixels in the display. Do not use the display with a brightness set
higher than the factory default setting of 75% over a longer period of time.
Note
•
If set to
Off
, the display is only illuminated during setup adjustments and will
be deactivated several seconds after the last entry. This does also apply for
direct track access, time search and skipping or searching.
•
If a disc has stopped, the cover is opened or no disc is inserted while the
cover remains closed, the PLANCK automatically activates the display saver
10 minutes after the last user interaction.
•
During active display saver, all messages are displayed at 25% brightness and
varying locations, changing every 12 seconds to prevent any 'burn-in' effects
to the display.