10
Important
·
The electrical specifications of your home country must meet the
electrical specifications printed onto the back panel.
·
The SAM 20 SE is a Class I unit and must be earthed. Please ensure a
stable earth connection. Phase ('hot' pin) is marked on the back panel
('
PHASE
') 11 .
·
If you connect the mains power cord please make sure that mains
switch 10 at the back panel is switched off.
·
Never pull the mains plug while the SAM 20 SE is switched on! Before
you pull the mains power cord off its socket 9 at the back panel, power
down the unit to stand-by mode and switch off the unit using mains
switch 10 .
Only in cases of extended absence – like vacations – or if massive trouble
on the mains power is to be expected you should switch off the SAM 20 SE
from the mains using the mains switch 10 . To disconnect the unit com-
pletely from mains pull the mains plug.
Tip
·
The use of high quality mains power cords could improve sound qual-
ity. Ask your local dealer for more information.
4.3 Orientation of mains plug
The correct polarization of mains is important for reasons of audio clarity
and stability. Please connect the mains power cord so that the hot pin of
the wall outlet is connected to the pin of the mains input 9 marked
'
PHASE
' 11 .
Summary of Contents for SAM 20 SE
Page 1: ...1 audionet SAM 20 SE Stereo Amplifier User s Manual...
Page 2: ...2...