12
Important
·
Although the SAM 20 SE has an effective protection system to pre-
vent damage to the circuits, switch off the unit while working on
the speaker and/or audio cables
.
·
The nominal loudspeaker impedance has to be at least 4 Ohms or
higher.
·
Never use force or tools tightening the terminal screws.
5.3 Preamplifier Output
The SAM 20 SE is equipped with a pair of RCA preamplifier outputs to
connect e.g. an additional amplifier or a subwoofer.
Please use high quality interconnectors to connect the
PRE OUT
16 of
your SAM 20 SE with an additional amplifier or subwoofer.
5.4 Recording devices
You can connect one recording device to the SAM 20 SE for recording and
playback.
Connect your recording device (like DAT or tape recorder) to the recording
output
REC OUT
15 of the SAM 20 SE. For playback please connect
your recording device only to input no. 5
IN 5
5 of the SAM 20 SE, if it
is also connected to the output
REC OUT
15 of your SAM 20 SE. If you
select input no. 5
IN 5
5 the output
REC OUT
15 is switched off to pre-
vent any feedback loops between your recording device and the
SAM 20 SE.
Please use inputs no. 1 1 to no. 4 4 and no. 6 6 to connect sources you
like to record from. With these inputs the recording output
REC OUT
15 is always active.
Summary of Contents for SAM 20 SE
Page 1: ...1 audionet SAM 20 SE Stereo Amplifier User s Manual...
Page 2: ...2...
