22
7.3.2 Display
Use keys
up
and
down
to select the desired brightness of the display. Key
up
increases, key
down
decreases the brightness.
Important
·
Long-term usage of the display set to maximum brightness (setting
100%) may cause extended signs of wear resulting in a decay of
contrast or brightness of individual dots in the display. Do not use
the display with a brightness set higher than the factory default of
50% over a longer period of time!
Note
·
Is the brightness set to
Off
the display is only on during setup or vol-
ume adjustments. It switches off automatically several seconds after
the last user entry.
·
The SAM 20 SE activates the 'display saver' automatically after 10
minutes without any user entry.
·
During active 'display saver', the display shows only the number of the
selected input channel and current volume level in the form of
In 4 -
47dB
. The display brightness is always reduced to 25%, and the loca-
tion of the information text will change randomly every 12 seconds to
prevent any 'burn-in' effect of the display.
·
The 'display saver' is de-activated and the display returns to its normal
mode as soon as any user entry is detected.
·
The user cannot switch off the automatic 'display saver' function!
►
GLOBAL SETUP
◄
Set Display Brightness
--------------+
Off
25%
50%
75% 100%
Brightness
adjustment
Title
Scale
Summary of Contents for SAM 20 SE
Page 1: ...1 audionet SAM 20 SE Stereo Amplifier User s Manual...
Page 2: ...2...
