24
active
The AutoStart function is active. As soon as you connect
the SAM 20 SE to mains (i.e. use the mains switch 10 on
the back panel) the unit starts up automatically to normal
operating mode. Use this setting for timer controlled oper-
ations.
7.3.5 By-Pass Mode
Use keys
up
and
down
on the front panel to select the input channel you
would like to use in By-Pass Mode.
Important
·
Before you are able to use the By-Pass Mode you first have to select
which of the input channels is dedicated to the By-Pass Mode.
·
For security reasons no input channel is selected for By-Pass Mode by
factory default (
By-Pass Mode disabled
).
·
Input 6 ('
Phono Input
') cannot be selected as input for the By-Pass
Mode.
The By-Pass Mode is primarily intended to integrate the overwhelming
sound quality of the SAM 20 SE into an existing home cinema setup or
expand an existing excellent stereophonic system based on the SAM 20 SE
to a complete home cinema setup without missing out on the qualities of
the SAM 20 SE. To realize this kind of setup, please proceed as follows:
1.
Connect you home cinema preamplifier according to its user's manual.
2.
Connect the output for the front channels
Left
and
Right
not to the
power amplifier but to one of the free inputs (except input 6
'Phono
Input
') of the SAM 20 SE.
3.
Use menu item
By-Pass Channel
of the setup menu of the
SAM 20 SE to select the input channel for By-Pass Mode you con-
nected the outputs
Left
and
Right
of the home cinema preamplifier to.
►
GLOBAL SETUP
◄
Set Input Channel
for By-Pass Mode:
Line Input 3
à
In3
Selected channel
for By-Pass mode
Title
Summary of Contents for SAM 20 SE
Page 1: ...1 audionet SAM 20 SE Stereo Amplifier User s Manual...
Page 2: ...2...
