background image

MT10A / MT12A / MT15A - 10/12/15 inches 2-way amplified speakers with bass reflex

Page  4

English

3 - Technical specifications and features

2 - Introduction

The MT10A, MT12A and MT15A speakers are the ideal solutions for live performances.
They deliver an astonishing power of 180W for the MT10A, 300W for the MT12A and 400W for the MT15A. This 
powerful output is perfectly clear, warm and deep, adapted to vocal, live or recorded sessions.
They are easy to install, light and compact: that's the best you can find for nomad installations without any 
compromise on quality, power or possibilities.

MT10A

MT12A

MT15A

Bi-amplification

150W RMS Class D for LF
30W RMS Class AB for HF

250W RMS Class D for LF
50W RMS Class AB for HF

350W RMS Class D for LF
50W RMS Class AB for HF

Total power output

180W RMS / 360W max.

300W RMS / 600W max.

400W RMS / 800W max.

Frequency response

60 Hz - 20 KHz

55 Hz - 20 KHz

50 Hz - 20 KHz

Power supply unit

SMPS

H x V Dispersion

120° x 60°

Filter cutoff frequency

3.5 KHz

2,8 KHz

3,6 KHz

Sound Pressure Level

119 dB max.

122 dB max.

123 dB max.

Woofer

10"
2" coil
4 Ohms - 170W RMS

12"
2" coil
4 Ohms - 250W RMS

15"
3" coil
4 Ohms - 350W RMS

Tweeter

1'' driver
8 Ohms
30 W RMS

1'' driver
8 Ohms
50 W RMS

Inputs

1 COMBO XLR/JACK MIC/LINE input
1 Mini Jack and Combo XLR/JACK LINE/AUX input

Output

1 XLR line output

Settings

Volume settings for each zone
HIGH/LOW +/- 15 dB main volume settings

Protection

Short-circuit, thermal and limiter

Housing and fixation system

2 monitor-specific angles
1 top handle and 2 side handles
2 M8 rigging points (below)
2 M8 rigging points (on top)
36mm mounting plate for a speaker 
stand

2 monitor-specific angles
1 top handle and 2 side handles
2 M10 rigging points (below)
2 M10 rigging points (on top)
36mm mounting plate for a speaker 
stand

2 monitor-specific angles
1 top handle and 2 side handles
2 M10 rigging points (below)
2 M10 rigging points (on top)
36mm mounting plate for a speaker 
stand

Dimensions

321 x 291 x 495 mm

385 x 348 x 595 mm

460 x 410 x 700 mm

Net weight

10.2 Kg

15.1 Kg

18.4 Kg

Summary of Contents for MT15A









Reviews: