If you have any questions or concerns – please call AudioQuest at (949) 585-0111
or email: info@audioquest.com
1
FLX 16-2, FLX 14-2
Bulk Spool Termination Manual
Thank you for choosing AudioQuest. This manual provides instruction for preparing
and terminating a bulk (unterminated) speaker cable.
Please be careful when using sharp tools. We recommend wearing safety glasses.
To terminate AudioQuest speaker cables you will need the following tools:
• Sharp knife or razor blade
• 1.5 mm. Hex (Allen) wrench (supplied with SureGrip 300, 500 & 1000
Series spade & banana plugs)
• Small Philips screwdriver (for 500 and 1000 Series connectors)
We recommend using the following tools, which can be found at:
audioquest.com/accessories, then click “Tools.”
• Paladin jacket stripper
• Ideal articulated wire stripper