RM500SL
®
User's Guide Version 3.4
June 2011
5 Networking
Section overview
The RM500SL may be connected to a Windows network by connecting to the rear
connector panel using a Cat 5, RJ-45 cable. This allows screen images to be printed on a
network printer or on a shared printer on a networked PC. Images and underlying data may
also be saved to a shared folder on a networked PC. See Printing and Storing Results for
details. The RM500SL may also be connected to a single computer using a network hub.
Networking requirements
The RM500SL may be connected to a Windows network by connecting to the rear
connector panel using a Cat 5, RJ-45 cable. For automatic address assignment, the network
must have a Dynamic Host Configuration Protocol (DHCP) server.
For manual addressing, the remote computer must be running Windows 95 or higher, File
and Printer Sharing for Microsoft Networks must be enabled and the TCP/IP Connection
must be configured so that the IP address of the remote computer is on the same subnet as
the RM500SL. These settings should be obtained from your network administrator.
Networking setup
Check “Networking requirements” and connect the RM500SL to your network.
1. Press <Setup> then highlight and <PICK> [Network]
2. In the Network poster, highlight and <PICK> [Enable networking].
3. If your network supports automatic address assignment (DHCP), highlight and <PICK>
[Obtain automatically]. Highlight and <PICK> [Test connection].
4. For manual configuration, highlight and <PICK> [Obtain manually]. Then highlight each
of the 4 boxes in each row and highlight and <PICK> the numbers, provided by your
23
Summary of Contents for RM500SL
